Die Head, Hand Threaded, 1/2 in, NPT, Right Hand Thread, Suitable For Hand-Held Power Drive

PIPE DIE HEAD OOR 1/2

DORMER Hand Tap,Plug M14x2, Straight Flute, Plug Chamfer, 4 -Flute, High Speed Steel, Bright Coated, 6H, 1-21/32 in Lg Thread, 3-19/32 in Lg, 0.429 in Dia Shank, D7 Thread Limit

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the...

Spiral Point Tap, Plug, #10-32, Plug, Stainless Steels up to 35RC Hardness, Steel, Imperial, UNF, #10-32 Thread, Plug Chamfer, 3 -Flute, High Speed Steel, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

DORMER Straight Flute Plug Taps, High Speed Steel, 4 Flute

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. Three-fluted taps have the greatest chip-holding capacity...

DORMER Straight Flute Hand Tap, General Purpose, Imperial, 2B/3B, High Speed Steel, Bright Coated, Right Hand Cut

The most versatile taps for hand use or machine tapping in a wide variety of materials in through or blind hole applications. Available in 3 chamfer lengths; taper lead which is ideally for short through holes, plug perfect for deeper through holes and...

REED Universal Die, NPT, High Speed Steel

Reed used its 100 plus years of die-making experience to select the best materials, methods and CNC production for its universal dies. These dies fit Reed's 5301PD power drive, Ridgid® 300, 300 compact, 535, 535 automatic, 1215, 1822-I, 1224 plus the...

DORMER Round Die, Right Hand Thread, Chromium Steel, Bright, Adjustable, Imperial

These dies are made of high speed steel with a 2A tolerance class, and 8° rake. They work well for hand or machine production of components less than 3xD in length.

RIDGE Pipe Tap, Straight Flute, Imperial, Tapered Chamfer, Right Hand Cut, High Carbon Steel, Oxide Coated, 7/16 to 2-13/64 in

Made from carbon steel in right hand configuration only. These taps are especially suited for restricted area work. All taps have taper of 3/4 in per foot.

DORMER Round Split Die, Right Hand Thread, Carbon Steel, Bright, Adjustable, Imperial

These dies are made of high speed steel with a 2A tolerance class and 8 deg rake. They work well for hand or machine production of components less than 3xD in length.