DORMER Die Stock, Straight Handle, Imperial, Round Compatible Die Shape, 20 mm

Dormer’s die stocks assist with the hand operation of circular dies. They have 3 or 4 location screws, depending on size. Stock #DS6 has a 2- incapacity, while Stock #DS8 has a 3- in capacity.

Bolt Die, 5/8 in -18 Thread, UNF, Right Hand Thread, High Speed Steel, Bright

NF HS UNIVERSAL BOLT DIE 5/8*

DORMER Round Split Die, Titanium Carbon Nitride, Bright

These dies are made of high speed steel with a 2A tolerance class and 8 deg rake. They work well for hand or machine production of components less than 3xD in length.

DORMER Round Die, Adjustable, 1/4 in Thk, 13/16 in OD Die, Right Hand Thread, High Speed Steel, Bright, Imperial, 1/4 in-28 Thread, UNF

Adjustable circular split die, for Unified National Fine thread UNF 1/4 in with 28 TPI, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006 in, dimensions according to BS...

Die Head, Hand Threaded, 1/2 in, NPT, Right Hand Thread, Suitable For Hand-Held Power Drive

PIPE DIE HEAD OOR 1/2

DORMER Hand Tap,Plug M14x2, Straight Flute, Plug Chamfer, 4 -Flute, High Speed Steel, Bright Coated, 6H, 1-21/32 in Lg Thread, 3-19/32 in Lg, 0.429 in Dia Shank, D7 Thread Limit

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the...

DORMER Straight Flute Plug Taps, High Speed Steel, 4 Flute

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. Three-fluted taps have the greatest chip-holding capacity...

DORMER Straight Flute Hand Tap, General Purpose, Imperial, 2B/3B, High Speed Steel, Bright Coated, Right Hand Cut

The most versatile taps for hand use or machine tapping in a wide variety of materials in through or blind hole applications. Available in 3 chamfer lengths; taper lead which is ideally for short through holes, plug perfect for deeper through holes and...

DORMER Round Die, Right Hand Thread, Chromium Steel, Bright, Adjustable, Imperial

These dies are made of high speed steel with a 2A tolerance class, and 8° rake. They work well for hand or machine production of components less than 3xD in length.