Machine Tap, Plug, 1/4"-20, Spiral Point, Relieved, Aluminum Magnesium, Cast Iron, Copper, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, 2 -Flute, 6007283

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

Machine Tap, Plug, #10-24, Spiral Point, Aluminum Magnesium, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, 2 -Flute

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

Hand Tap, Plug, M6 x 1 Thread High Speed Steel,

These general purpose taps can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the taps...

Die Head, Hand Threaded, 1 in, NPT, Right Hand Thread, Alloy Steel Die, Alloy Steel, Suitable For Hand-Held Power Drive

PIPE DIE HEAD OOR 1"

Thread Repair Kit, UNC, M6 x 1 Thread, 18 -Piece, (18) Inserts, Drill, Heli-Coil Tap, Installation Tool, Stainless Steel, Plain

Heli-Coil® has complete coverage of thread repair in inch and metric sizes. Available in Metric Coarse sizes 6 through 10, these kits contain everything you need to do the job right.

Die Head, Hand Threaded, 7/16 in, UNF, Left Hand Thread, 14 Thread, Alloy Steel Die, Alloy Steel, Suitable For Ridgid® 00-RB Manual Bolt Threaders

LH BOLT DIE HEAD OORB 7/16

Tap Wrench, Plain, 3-3/4 in Lg

The #166 Tap Wrench for No. 12 to 1/2 In Taps is designed to hold and turn taps—tools that cut threads on the inner surface of a hole or pipe—or other small tools, such as hand reamers and screw extractors.

Tap Wrench, Plain, 2-1/4 in Lg

The #163 Tap Wrench for No. 0 to No. 8 Taps is designed to hold and turn taps—tools that cut threads on the inner surface of a hole or pipe—or other small tools, such as hand reamers and screw extractors.

Tap Wrench, Reversible Ratchet, 4-1/4 in Lg

The #162R Ratchet Tap Wrench for No. 12 to 1/2 in, Taps is designed to hold and turn taps—tools that cut threads on the inner surface of a hole or pipe—or other small tools, such as hand reamers and screw extractors.