Plated Jam Nut (NUT JAM PLATED NF 5/16*)

NUT JAM PLATED NF 5/16*Unit of Measure=EA|Weight=0.0060|Brand=Stafford Mfg.

Regular Nut Eye bolts (EYE BOLT 1-1/4 X 8)

EYE BOLT 1-1/4 X 8|Crosby's eye bolts are all hot-dip galvanized after threading, and are furnished with standard hot-dip galvanized hex nuts. They are made of forged steel that has been quenched and tempered, and are recommended for straight line pulls...

Stub-End Turnbuckles (TRNBKL 1/2X6 STUB END)

TRNBKL 1/2X6 STUB END|Indusco’s stub end turnbuckles are hot dip galvanized steel after threading. Hexagon ends on all bodies provide full wrench bearings. NOTE: Recommended for straight or in-line pull only; do not subject to bending or unusual angles...

Stub-End Turnbuckles (TURNBUCKLE 3/8X6 STUB END)

TURNBUCKLE 3/8X6 STUB END|Indusco’s stub end turnbuckles are hot dip galvanized steel after threading. Hexagon ends on all bodies provide full wrench bearings. NOTE: Recommended for straight or in-line pull only; do not subject to bending or unusual...

Flat Washer (1" GALV. FLAT WASHER)

1" GALV. FLAT WASHER|Flat washers are the most common type of washer, used to distribute the force/stress of a nut or bolt. They can also help reduce friction and heat when turning a bolt or nut. Warren Fastener’s #6168 washer measures 1 inch.Unit of...

Split-Lock Washer (1" GALV. LOCK WASHER)

1" GALV. LOCK WASHER|Hot dipped Galvanized Lock washers for Hex Cap and Machine Screw assembly. Lock washers provide greater tension and better load distribution to prevent loosening due to vibration. Warren Fastener’s #3647 washer measures 1 inch.Unit...

Hex Jam Nut (1"-14 ZIC HEX JAM NUT)

1"-14 ZIC HEX JAM NUT|Hex jam nuts are thinner than a standard hex nut, but have the same dimension across the flats and corners. Hex jam nuts have two common applications. A jam nut can be threaded onto a bolt and run tight against the standard nut...

Lock Washers (WASHER FLAT 316 NC 1IN)

WASHER FLAT 316 NC 1IN|Star Stainless’s lock washers add an extra level of security by providing greater surface area under the fastener. This helps prevent a nut, bolt or screw from pulling through the material. They also place tension against a nut...

Lock Washers (WASHER FLAT 316 NC 7/8)

WASHER FLAT 316 NC 7/8|Star Stainless’s lock washers add an extra level of security by providing greater surface area under the fastener. This helps prevent a nut, bolt or screw from pulling through the material. They also place tension against a nut...