SEPCO #310 Packing, High Temperature, 1200 deg F, Braided Carbon, Black

Braided carbon yarn with Inconel wire inserted over a pliable homogeneous core of material. The braid is made from a high temperature, Inconel wire inserted yarn. The finished packing is treated with a high temperature graphite lubricant and a corrosion...

SEPCO Tek-Pro Packing, #ML6225, Packing, 550 deg F, 1885 fpm Shaft, 3 to 12, Multi-Lok Braid Acrylic, Beige

Sepco’s Style ML6225 packing is made of a multi-lok braid, using a proprietary blend of non-asbestos Tek-Pro yarns treated with PTFE throughout the body of the packing. The PTFE suspensoid thoroughly impregnates, seals and fills all voids, providing...

SEPCO ML-163 Multi-Lok, Packing, 1000 deg F, 3600 rpm Shaft, Multi-Lok Braid Acrylic

Sepco’s ML-163 packing is a multi-lok braid made of premium grade yarns, thoroughly impregnated with a special heat and chemical resistant lubricant and lightly coated with a non-contaminating film. It works very well in paper mills on Jordan pumps,...

SEPCO Grafoil Gasket Sheet, Graphite

Sepco’s Grafoil gaskets provide leak-free performance at moderate bolt loads, with no cold flow or creep. They eliminate precision bolt tightening and flange sticking. In fact, the prime requirement for satisfactory sealing with Grafoil gaskets is...

Thread Tape, PTFE

This PTFE tape comes in as enclosed plastic spool which has an unlimited shelf life. Since it is completely synthetic and inert, it can be used in a multitude of situations including thread sealing on pipes, sprinkler systems, plumbing lines and...

SEPCO #ML2235 Packing, Yarn Valve, 500 deg F, 1200 fpm Shaft, 0 to 14, Multi-Lok Braid

Unlike other PTFE fluorocarbon filament packing, SEPCO® pre-lubricates the fibers of the ML2235 to provide a softer, more flexible packing with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications,...

SEPCO #ML2225 #ML2225 Packing, Braided, 500 deg F, 1850 fpm Shaft, 3 to 11, Acrylic Fiber

The SEPCO® ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high-temperature lubricant is...

Gasket Sheet, Felt, 36 in Lg, 36 in Wd, -80 to 200 deg F

Southeastern Felt’s gaskets are made of F15 grey felt material. It is a low-density needle-punched material used for gasketing, as well as for spacing and padding between other materials. It is often used for packaging, crating and lining.

Flange, Slip-On, 4 -Bolt Hole, Slip On, Class 150, Raised Face Shape, 304 Stainless Steel

Slip-on flanges slide over the end of piping and are then welded into place to provide sufficient strength and prevent leakage. They are ideal for lower pressure applications, and install faster and easier than other types of flanges.