Joint Sealant, -450 to 600 deg F, 200 Bar, PTFE

This original form-in-place gasketing material can be used practically everywhere. It is easy to install, even on vertical surfaces and is ideal for large, complex or damaged flanges. Since there is no waste, this joint sealant usually costs less, on a...

Packing

SEPCO's SEPAK is an asbestos-free, non-toxic, PTFE that will not contaminate product flow. It can be used in virtually any valve or gasket application including process lines in food and beverage operations, petroleum refineries and chemical processing...

Pump Seal, 23 to 200 deg C, 10 Bar, SE-750

PUMP SEAL SE-750

Pump Seal, 23 to 200 deg C, 10 Bar, SE-702

PUMP SEAL SE-702

Packing, Steam, 3/8 in, 600 deg F, 500 psi

Sepco’s 151RB packing is made of closely woven cloth which is treated with a heat and oil resistant rubber friction. Built into the packing is a resilient rubber backing which provides a cushion against high pressure. The packing is then lubricated with...

Pump Seal, 23 to 200 deg C

PUMP SEAL PSE800

Gasket Sheet, 4 ft Lg, 1/8 in Thk, Graphite

Sepco’s Grafoil gaskets provide leak-free performance at moderate bolt loads, with no cold flow or creep. They eliminate precision bolt tightening and flange sticking. In fact, the prime requirement for satisfactory sealing with Grafoil gaskets is...

Packing, 3/4 in, 500 deg F, 1885 fpm Shaft, 0 to 14, Multi-Lok PTFE, White Color

The most severe services. All oxidizers and corrosives with one exception: Molten alkali metals. Use this specially treated PTFE packing where other PTFE filament glazed or gotten hard because of frictional heat due to high speeds and thermal expansion.

Impregnated Packing, 1850 fpm Shaft, 260 deg C

The SEPCO® ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is...