Foot Trough End Flange, 12 in dia Conveyor, 1/2 in dia Flange Bolt, Steel, 2-3/4 in wd, 15 in lg, 1/4 in thk

Trough feet are used to support the trough at trough connections. They align and fasten the trough to the floor or an existing structure.

Hanger Bearing, Plain Sleeve, 2-1/2 in od, Uncoated

Cast iron bearings are used as support bearings for drive and screw conveyor shafts. While compatible with a 220, 216 and 19B style hangers, it requires a hardened shaft. This style bearing can...

Internal Collar, Suitable For 2-1/2 in Nominal Pipe, 2.009 in id Collar, 2.47 in od Collar, Steel, 5 in lg

Internal collars are made from special seamless tubing and machined for a press fit in the conveyor pipe. The close tolerance collars are jig drilled for proper alignment and plug welded for maximum...

Internal Collar, Suitable For 3 in Nominal Pipe, 2.447 in id Collar, 3.068 in od Collar, Steel, 5 in lg

Internal collars are made from special seamless tubing and machined for a press fit in the conveyor pipe. The close tolerance collars are jig drilled for proper alignment and plug welded for maximum...

Plain Trough Cover, Suitable For 12 in Trough Conveyor, Steel, 17-1/2 in wd, 144 in lg, 0.0747 in thk

Martin's trough coverings help keep material inside the trough and protect it from outside elements. They also prevent injuries by keeping workers clear of the moving parts inside the conveyor trough...

Repair Kit, Elastomer, 250 ml Container

Martin Engineering’s EZ-Patch kit is a quick-curing, two-component kit for the repair and reconstruction of elastomeric materials. The convenient pre-measured kits provide quality repairs of many...

Roller Chain Sprocket, Type A, Single Strand, #40 Chain, 0.284 in Lg Thru Bore, Steel, Protective Coating

A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.

Roller Chain Sprocket, Type A, Single Strand, #50 Chain, 0.343 in Lg Thru Bore, Steel, Protective Coating

A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.

Roller Chain Sprocket, Type A, Single Strand, 5.19 in od, #60 Chain, 20 -Teeth, 4.794 in Dia Pitch, 0.459 in Lg Thru Bore, Steel, Protective Coating

A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.