PARKER Elbow, 3/16 x 1/8 in, Compression x MNPT End, 2800 psi, -65 to 250 deg F, Brass, 90 deg Elbow

Parker’s Compress-Align Fittings are pre-assembled with a captive sleeve, always oriented for a faster installation. The design of the captive sleeve aligns to seal even out-of-round tubing.

PARKER Ferrule, Sleeve, 3/8 in, Flareless Bite End, 0.39 in Lg, 6000 psi, -65 to 500 deg F, Stainless Steel, 0.38 x 1/2 in dia

Parker's 24 deg Flareless tube fittings, Ferulok, have a visible bite which allows the fitting assembler to visually inspect the bite quality, which significantly minimizes the risk of improper assembly and related service problems in hydraulic...

Valve Manifold, Garden Hose, 4 Outlet, 3/4 in Outlet, 1 -Inlet, 100 psi, 120 deg F, Forged Brass, Domestic

Dixon Brass’s #500-GH4V manifold has a swivel inlet, PTFE seat and stainless steel balls. Standard Flow.

Coupler, Type B, Cam and Groove, Coupler, 1 in, Female Coupler x MNPT End, 2-1/2 in Lg, 250 psi, -150 deg F, Brass, 2.44 in dia, Casting, Domestic

PT Coupling’s “B” Female coupler has Male NPT threads. Available in sizes from 1/2 to 12 in, it is stocked in aluminum, brass and stainless steel.

PARKER Elbow, 1/4 x 1/8 in, Compression x FNPT End, 0.91 in Lg, 1400 psi, Brass, 0.188 in Flow Diameter, 7/16 in-24, Forged, 90 deg Elbow

Parker's compression fittings are economical and offered in both extrusions and forgings. These compression fittings require no flaring, soldering, tube preparation or special tools to operate. Compression fittings are especially useful in installations...

Push to Connect Fitting, Ball Seat, 1/4 x 1/8-27 in, FNPSM Swivel x Push-On Hose Barb End, 1/2 in Hex, 350 psi, -40 to 150 deg F, Brass, 1.41 in lg

Dixon's push-on female hose barbs are intended for use with Lok-On hose only. They require no hose clamps or ferrules, and will properly grip the Lok-On hose when they are pushed all the way in. Used correctly, the cut end of the hose will be concealed...

Braided Collar, 1-1/4 in

Hosemaster’s braided collars are rings made of tubes or metal strips, placed over the ends of a braided hose during fabrication. They contain the braid wires for attachment of fittings and ferrules and immobilize heat affected corrugations.

Washer Seal Spud, Ground Joint, Spud, Thread Wing Nut x FNPT End, 450 deg F, Steel, Zinc Plated, 1/2 to 2 in, b-0

Dixon’s Boss washer seal is not subject to corrosion and offers resistance to chemicals and steam found in manufacturing facilities. A precisely machined recess holds the seat firmly in place, allowing it to absorb harsh punishment. Boss couplings are...

Hose Mender, Machined, Male End, Carbon Steel

A machined-steel mender that repairs leaking hose quickly and easily. The short length of these menders makes them particularly suitable for use on hose reels.