Adapter, Adapter, 3/4-11-1/2 x 3/4-14 in, Male GHT x MNPT End, 1-1/16 in Hex, Brass, 1-1/2 in, Domestic

Dixon’s brass GHT adapters are available in a wide variety of sizes and styles.

Adapter, Adapter, 3/4 in-11-1/2, Female GHT Swivel End, 1-3/16 in Hex, Brass, 1.32 in, Domestic

Dixon’s brass GHT adapters are available in a wide variety of sizes and styles.

Adapter, Adapter, 3/4-11-1/2 x 1/2-14 in, Male GHT x MNPT End, 1-1/16 in Hex, Brass, 1-1/2 in, Domestic

Dixon’s brass GHT adapters are available in a wide variety of sizes and styles.

PARKER Adapter, Straight, 3/16 x 1/8 in, Compression x MNPT End, 7/16 in Hex, 1.07 in Lg, 1900 psi, -65 to 250 deg C, Brass, 1/8 in Flow Diameter, Forged, Domestic

Parker’s Compress-Align Fittings are pre-assembled with a captive sleeve, always oriented for a faster installation. The design of the captive sleeve aligns to seal even out-of-round tubing.

PARKER Elbow, 3/16 x 1/8 in, Compression x MNPT End, 2800 psi, -65 to 250 deg F, Brass, 90 deg Elbow

Parker’s Compress-Align Fittings are pre-assembled with a captive sleeve, always oriented for a faster installation. The design of the captive sleeve aligns to seal even out-of-round tubing.

PARKER Ferrule, Sleeve, 3/8 in, Flareless Bite End, 0.39 in Lg, 6000 psi, -65 to 500 deg F, Stainless Steel, 0.38 x 1/2 in dia

Parker's 24 deg Flareless tube fittings, Ferulok, have a visible bite which allows the fitting assembler to visually inspect the bite quality, which significantly minimizes the risk of improper assembly and related service problems in hydraulic...

Coupler, Type B, Cam and Groove, Coupler, 1 in, Female Coupler x MNPT End, 2-1/2 in Lg, 250 psi, -150 deg F, Brass, 2.44 in dia, Casting, Domestic

PT Coupling’s “B” Female coupler has Male NPT threads. Available in sizes from 1/2 to 12 in, it is stocked in aluminum, brass and stainless steel.

PARKER Elbow, 1/4 x 1/8 in, Compression x FNPT End, 0.91 in Lg, 1400 psi, Brass, 0.188 in Flow Diameter, 7/16 in-24, Forged, 90 deg Elbow

Parker's compression fittings are economical and offered in both extrusions and forgings. These compression fittings require no flaring, soldering, tube preparation or special tools to operate. Compression fittings are especially useful in installations...

Push to Connect Fitting, Ball Seat, 1/4 x 1/8-27 in, FNPSM Swivel x Push-On Hose Barb End, 1/2 in Hex, 350 psi, -40 to 150 deg F, Brass, 1.41 in lg

Dixon's push-on female hose barbs are intended for use with Lok-On hose only. They require no hose clamps or ferrules, and will properly grip the Lok-On hose when they are pushed all the way in. Used correctly, the cut end of the hose will be concealed...