Machine Tap, #10-24, Spiral Point, Aluminum Magnesium, Cast Iron, Copper, Nickel, Stainless Steel, Steel, Synthetic Materials, Titanium, Imperial, UNC, 2 -Flute

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

Hand Tap, Plug Chamfer, High Speed Steel, M6 x 1 Thread

These general purpose taps can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the taps...

Hand Tap, Straight Flute, Plug Chamfer, 4 -Flute, High Speed Steel, Bright Coated, 6H, 1-21/32 in Lg Thread, 3-19/32 in Lg, 0.429 in Dia Shank, D7 Thread Limit

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. The chips are retained in the flutes during use. Each of the...

Spiral Point Tap, #10-32, Plug, Stainless Steels up to 35RC Hardness, Steel, Imperial, UNF, #10-32 Thread, Plug Chamfer, 3 -Flute, High Speed Steel, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The spiral point forces the chips ahead of the tap, thereby preventing clogging and recutting...

Straight Flute Taps, Plug, High Speed Steel, 4 Flute

These general purpose taps by Dormer can be used by hand or under power, in through or blind holes, and are suitable for tapping most materials. The chips are retained in the flutes during use. Three-fluted taps have the greatest chip-holding capacity...

Straight Flute Hand Tap, General Purpose, Imperial, 2B/3B, High Speed Steel, Bright Coated, Right Hand Cut

The most versatile taps for hand use or machine tapping in a wide variety of materials in through or blind hole applications. Available in 3 chamfer lengths; taper lead which is ideally for short through holes, plug perfect for deeper through holes and...

Pipe Tap, Straight Flute, Imperial, Tapered Chamfer, Right Hand Cut, High Carbon Steel, Oxide Coated, 7/16 to 2-13/64 in

Made from carbon steel in right hand configuration only. These taps are especially suited for restricted area work. All taps have taper of 3/4 in per foot.

Machine Tap, Plug Chamfer, High Speed Steel, Bright Coated, Right Hand Cut

These taps are primarily designed for tapping through holes, but can also be used in blind holes deep enough for chip accumulations in the bottom of the hole. The taps can be used by hand or under power and are suitable for tapping most materials,...

Pipe Tap, Straight Flute, Imperial, NPT, Tapered Chamfer, High Speed Steel, Bright Coated, Medium

Straight Flute. Medium hook for multi-material tapping. Generally used for pipe fittings and couplings in most ferrous and non-ferrous materials. The nominal size of a pipe tap is that of the pipe fitting to be tapped and not the actual size of the tap...