Heat Resistant Coating, Can, 2 gal Container, 20.4 lb, Solvent Base, 2 hr Drying, 24 hr Curing, Silver , Solvent, 5 to 35 deg C, 40 deg C Flash, 499 g/L VOC

Rustoleum’s High Heat Aluminum is a unique coating that uses a pure silicone resin to provide protection to surfaces subject to temperatures between 500 deg and 1200 deg F. It can be used both interior and exterior as a two-coat system for incinerators,...

Paint Colorant, Dye Concentrates, 1 qt, Acetone, 2-Butoxyethanol, Brown, Red Color

Gemini’s NGR dye concentrates are designed for tinting spray cans, lacquers or sealers when they are being used as toners or as tinted washcoats. They provide ultimate color quality and transparency and a wide range of colors (eight rich primary...

Floor Coating, Solvent-Free

ICO-Floor coating is a two-part, solvent free 100% solid epoxy coating for concrete, metal and wood surfaces. Applied by spray, roller or brush, it can be applied overhead or on vertical surfaces up to 5 mil without sagging or dripping. ICO-Floor...

Semstone 145 Novalac Epoxy 1 Gallon Kit (Part A and Part B)

Semstone 145 is a 100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 145 is specially formulated to...

Floor Coating, 1 gal Container, Liquid, Clear , High Gloss, 200 to 350 sq-ft/gal, Solvent

The 6000 System is a two-component water-based epoxy coating for application to concrete floors. It combines the performance of solvent-based epoxies with the convenience of water-based coatings. This coating is designed as a moderate duty floor coating...

Floor Coating, Solvent-Free, Drak Gray Color

ICO-Floor coating is a two-part, solvent free 100% solid epoxy coating for concrete, metal and wood surfaces. Applied by spray, roller or brush, it can be applied overhead or on vertical surfaces up to 5 mil without sagging or dripping. ICO-Floor...

Industrial Retarder, 1 gal Container, Liquid, Clear , Methyl N-amyl Ketone, 10 to 25 deg C, 6.8 lb/gal VOC, Solvent

SOL-9012 is used specifically for increasing the open time of acid catalyzed coatings. In hot or adverse conditions it will improve flow and leveling, help eliminate bubbles and is completely HAPs free.

Acrylic Lacquer, 5 gal Container, Clear , Flat

Gemini’s AL-0010 is a clear acrylic lacquer that outperforms its competitors in the areas of moisture resistance, chemical resistance, flexibility and clarity. It can be used as a self-sealing system or over pre-catalyzed or conversion sealer for added...

Heat Resistant Coating, Can, 1 gal Container, 9.3 lb, Solvent Base, Aluminum Applicable

Rustoleum’s High Heat Aluminum is a unique coating that uses a pure silicone resin to provide protection to surfaces subject to temperatures between 500 deg and 1200 deg F. It can be used both interior and exterior as a two-coat system for incinerators,...