GATES Cotton Cleaner Timing Belt, 1-1/2 in Wd, -22 to 212 deg F, Chloroprene, Kevlar Reinforced, Black, 1 in Pitch

Cotton Cleaner belts are specifically designed for use on Cotton Gins and inclined cleaner machines. They feature a trapezoidal tooth profile and aramid tensile cords.

GATES Variable Speed V-Belt, Bandless, 2-3/4 in Wd Top, 30 deg Groove, Rubber, Polyester Reinforced

Gates Multi-Speed belt provides top performance on variable speed drives. It adjusts itself to the pulley groove without difficulty, providing a wide range of speeds and speed ratios. In addition to the standard Multi-Speed belt line, special sizes (top...

Drive Tape Belt, Polyester Carcass

Jason Beltco’s Panther belts have a woven endless polyester carcass, which can be produced with various rubber or foam coatings. The Panther 400 line has a thickness of 0.9 mm, while the Panther Heavy line has a thickness of 1.3mm.

GATES V-Belt, Molded Notch, Heavy Duty, 5VX Section, 5/8 in Wd Top, 35/64 in Thk, 1 -Rib, 1 -Band

When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC molded notch belts. Our proprietary ethylene construction process provides a superior combination of...

Link Belt, Ribbed, 100 ft Lg Outside, 1 -Rib, -40 to 240 deg F, 1 -Band, Polyurethane, Polyester, Red

Fenner’s PowerTwist belts are made of a custom-designed, high-tech urethane/polyester composite. This blend is reinforced with multiple plies of polyester, providing significantly superior resistance to oils, grease, water, most common...

GATES PowerGrip Timing Belt, 3.13 in Min Dia Pulley, -30 to 180 deg F, Neoprene, Fiberglass Reinforced, Black, Heavy

Gates® classical synchronous PowerGrip® Timing belts offer a maintenance-free, economical and OE quality solution for your conventional timing drives such as chains and gears. Its application range extends from minimum drives (computer printers) to...

GATES PowerGrip Timing Belt, 1.88 in Min Dia Pulley, -30 to 180 deg F, Neoprene, Fiberglass Reinforced, Black, Light

Gates® classical synchronous PowerGrip® Timing belts offer a maintenance-free, economical and OE quality solution for your conventional timing drives such as chains and gears. Its application range extends from minimum drives (computer printers) to...

GATES V-Belt, CX Section, Heavy Duty, Raw Edge, Molded Notch, CX Section, 7/8 in Wd Top, 17/32 in Thk, 1 -Rib

Built for superior performance on heavy-duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back-side idler drives.

Timing Belt, 50 mm Wd, Polyurethane, Tensile Steel Cord Reinforced, 10 mm Pitch

Metric timing belts are available in 5mm and 10mm pitch. They have steel tension members bonded to a urethane body. They are especially useful for chemically resistant operating requirements and for clean environments. For non-stock widths, Jason can cut...