KURIYAMA Discharge Hose, Light Weight, 4 in, 4 in Id, 4-1/2 in od, 100 ft Lg, 75 psi Working, -22 to 176 deg F, SBR, Natural Rubber, Black , Domestic

Kuriyama’s T760AA series hose is used to discharge dry powders under low pressure, such as cement, grains and animal feed. It has a black conductive SBR/NR blend cover (abrasion and ozone resistant), a 3/16 in thick black static conducting natural rubber...

CONTITECH Duct Hose, Vacuum, 2 in, 2 in Id, 2.3 in od, 3 psi Working, 0 to 150 deg F, Pliovic Synthetic Compound Tube, Green , Domestic

Contitech's Spiraflex Ducting hose is versatile enough for use in leaf collection machines, manhole blowers, air conditioning and heating applications, air ducting and pollution control devices – pretty much anything except pressure service! The tube and...

CONTITECH Suction and Discharge Hose, General Purpose, Water, 2-1/2 in, 2-1/2 in Id, 2.95 in od, 100 ft Lg, 100 psi Working, -40 to 180 deg F, EPDM, Wrapped, Black Color

Contitech's Plicord Versiflo hose is ideal for medium duty water discharge service where the hose does not encounter severe handling. The tube and body are made of black Versigard, while the reinforcement is made of spiral plied synthetic fabric.

CONTITECH Suction and Discharge Hose, Medium Duty, 6 in, 6 in Id, 6.32 in od, 100 ft Lg, 125 psi Working, -25 to 180 deg F, EPDM, Wrapped, Black , Domestic

Contitech's Plicord Versiflo 125 hose is ideal for medium duty water discharge service where the hose does not encounter severe handling. The tube and body are made of black Versigard, while the reinforcement is made of spiral plied synthetic fabric.

Blasting Hose, Abrasive

Blastmaster® Xtreme-Duty® Abrasive Blasting Hose has a 5/16 in thick liner. The combination of the 25% thicker liner and advanced material formulation increases service life up to 150% over industry standard blast hose with a 1/4 in thick liner...

Abrasive Blasting Hose, 3/4 in Id, 12-1/2 ft Lg, 150 psi Working, Aluminium

Marco's abrasive blasting hose has a liner made of an advanced abrasion resistant material, with carbon black added to dissipate static electricity. It has a pin-pricked cover to reduce blistering.It is available in sizes from 3/8 in ID to 2 in ID and...

Abrasive Blasting Hose, Sandblasting, 1 in Id, 12-1/2 ft Lg, Aluminium

Marco's abrasive blasting hose has a liner made of an advanced abrasion resistant material, with carbon black added to dissipate static electricity. It has a pin-pricked cover to reduce blistering.It is available in sizes from 3/8 in ID to 2 in ID and...

Sandblast Hose, 100 ft Lg, -20 to 180 deg F

Novaflex’s #5900 heavy duty sandblast hose is a 4-ply abrasion-resistant sand and shot blast hose that will accept higher working pressures and the most severe applications. Its tube is made of black abrasion resistant synthetic rubber, reinforced with...

KURIYAMA Abrasion Resistant Duct Hose, Heavy Duty, 2-1/2 in Id, 3.07 in od, 40 psi Working, 3 in Bend Radius, -40 to 65 deg C, PVC, Domestic

Kuriyama's UFC hose has a thick abrasion-resistant polyurethane liner, designed for dry applications where severe abrasion is a factor. It has a static-dissipative cover to keep material flowing smoothly, and to prevent static build-up. Its transparent...