Sleeve Anchor, Expansion, 3/8 in Dia, Stainless Steel, Combo Flat Head, Zinc Plated, 1-1/4 in Dp Minimum Embedment, 5 in Lg, 3/8 in Drill

The Lok-Bolt AS is an all-steel pre-assembled single unit sleeve anchor which is designed for use in concrete or masonry base materials. The anchors are available in multiple head styles for multiple applications and a finished appearance. Anchor...

U-Bolt, 1/4 in Lg Inside, 1-1/8 in Lg Thread, Zinc Plated, 3-1/8 in Dia

Chicago’s long-length round-bend U-bolts are designed for steel or wrought iron pipes. The bolts are produced from low-carbon steel with an electro-galvanized finish, and supplied with NC rolled threads and two hex nuts. An unassembled U-bolt plate is...

Combination Tool, Alloy Steel

Alemite’s all-in-one tool can be used to help extract broken fittings, rethread holes and install new straight or angle-type fittings. This model can be used with 1/4 in-28 taper thread.

U-Bolt, Standard, Imperial, 1-1/2 in Lg Thread, Zinc Chromate, 5/16 in-18 Dia

Hindley's U-Bolts come with nuts and plates assembled, and have a zinc chromate finish.

Wall Anchor, Polly Hollow, Carbon Steel

Powers Fastener’s Polly hollow wall anchor is a sleeve type hollow wall anchor designed for use in base materials such as plaster, wallboard, concrete block or hollow tile. Once the anchor has been set, the screw may be removed as often as necessary...

Elevator Bolt, 5/16 in Dia

4B's Norway bolts have a large bolt head diameter, with maximum resistance to pull through. Their flat bolt head pulls fully flush into the belt, reducing the risk of rip-out. These bolts are suitable for recessed or non-recessed bolt holes, and are...

Wedge Anchor, Mechanical, 1/2 in Dia, Carbon Steel, Zinc Plated, 2-1/4 in Dp Minimum Embedment, UNC

The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded...

Wedge Anchor, Mechanical, 5/8 in Dia, Carbon Steel, Zinc Plated, 2-3/4 in Dp Minimum Embedment, UNC

The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded...

Wedge Anchor, Mechanical, 3/8 in Dia, Carbon Steel, Zinc Plated, 3/8 in Drill, 3/8 in-16 Thread, UNC

The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded...