Elevator Bucket, Nylon, 7-1/8 in ht

4B's Atlas elevator buckets are made of DuPont's ZYTEL ST super-tough nylon, injection-molded and designed for higher capacity. These buckets are solid through and through, with no occlusions in the structure. They can be used in many applications such...

Elevator Bucket, Nylon, Blue , 14-7/16 in ht

4B's Starco elevator buckets are engineered for higher capacity, with tapered sides to ensure maximum fill at a closer spacing. Its unique front profile guarantees clean discharge over a wider range of operating speeds than most conventional buckets. It...

Plain Trough Cover, Suitable For 12 in Trough Conveyor, Steel, 17-1/2 in wd, 144 in lg, 0.0747 in thk

Martin's trough coverings help keep material inside the trough and protect it from outside elements. They also prevent injuries by keeping workers clear of the moving parts inside the conveyor trough. Model TCP is a plain, basic cover.

Fixed Spout, Plain Standard Discharge, Suitable For Discharge and Gate, 13 in Spout, 12 Bolt, 0.188 in thk Spout, 12 in dia Conveyor, Steel, 8-7/8 in wd

Standard discharge spouts are fabricated in proportion to the size and thickness of the corresponding trough. They can be furnished loose for attachment in the field or welded to the trough. The bottom flanges of the spout are drilled per CEMA standards.

Foot Trough End Flange, 12 in dia Conveyor, 1/2 in dia Flange Bolt, Steel, 2-3/4 in wd, 15 in lg, 1/4 in thk

Trough feet are used to support the trough at trough connections. They align and fasten the trough to the floor or an existing structure.

End Plate, Outside Trough, Suitable For Roller Bearing/Ball Bearing and Discharge Gate, Steel, 17-1/4 in wd, 17-3/8 in ht, 1/4 in thk

Outside trough ends with feet are used to support end bearing and cover. Drilling for ball bearings or roller bearings.

Flanged Gasket, Flange, Rubber, Red

Martin's TFG model flanges are used on trough ends.

Waste Pack Seal, Suitable For Flanged Ball, Roller or Other Standard 4-Bolt Bearings, Cast Iron

Waste pack seals prevent bulk material leaks, which reduces product loss, contamination and bearing failure. This type of seal is normally installed between the trough end and bearing, but may be used separately on pedestal type trough ends. It is...

Fixed Spout, Plain Standard Discharge, Steel, Protective Coating

Standard discharge spouts are fabricated in proportion to the size and thickness of the corresponding trough. They can be furnished loose for attachment in the field or welded to the trough. The bottom flanges of the spout are drilled per CEMA standards.