AMERCOAT Alkyd Shop Primer, Quick Dry, 5 gal Container, Gray , 2.8 lb/gal VOC

Amercoat is an economical ready-to-spray, fast air dry, alkyd shop coat designed for priming properly prepared bare steel. It is ideally suited for use in fabrication shops or on structural steel. It...

AMERLOCK 2 Epoxy Coating, High Solid, 1 gal Container, 5 to 50 deg C, 1.5 lb/gal VOC, Black/Medium Gray

Amercoat's Amerlock 2 is a fast-drying, surface-tolerant, VOC-compliant epoxy. It has a low-temperature cure (down to 0 deg F), dries to touch in two hours and can be recoated in three hours. It...

AMERLOCK 400 Epoxy Coating, High Solid, 1 gal Container, Liquid, >0.21 cm2/s, 4-1/2 hr Curing, 5 to 50 deg C

Amerlock #400 is a high-solids epoxy coating that is VOC-compliant and self-priming and can cure through a wide range of temperatures. Its low solvent level reduces the chances for film pinholing and...

AMERLOCK 400 Epoxy Coating, High Solid, Liquid, >0.21 cm2/s, 4.5 hr Curing, 5 to 50 deg C, 1.5 lb/gal VOC

Amerlock #400 is a high-solids epoxy coating that is VOC-compliant and self-priming and can cure through a wide range of temperatures. Its low solvent level reduces the chances for film pinholing and...

AMERLOCK 400 Epoxy Coating, High Solid, Liquid, Pearl Gray, >0.21 cm2/s, 4.5 hr Curing, 5 to 50 deg C, 1.5 lb/gal VOC

Amerlock #400 is a high-solids epoxy coating that is VOC-compliant and self-priming and can cure through a wide range of temperatures. Its low solvent level reduces the chances for film pinholing and...

AMERON #275E Antifouling Agent, 5 gal Container, Red , Flat, 1010 sq-ft/gal at 1 mil, 505 sq-ft/gal at 2 mil, Vinyl, 0 to 120 deg F, 324 g/L VOC

Ameron's #275E coating is a vinyl, cuprous oxide antifouling that is typically used on ship hulls, providing a flat finish in standard red color. It complies with MIL-P-15931D grades A and B...

AMERON AMERLOCK 2 Epoxy Coating, High Solid, 5 to 50 deg C, 1.5 lb/gal VOC

Amercoat's Amerlock 2 is a fast-drying, surface-tolerant, VOC-compliant epoxy. It has a low-temperature cure (down to 0 deg F), dries to touch in two hours and can be recoated in three hours. It...

AMERON Nu-Klad 114A Epoxy Filler Compound, Liquid, Off-White , Gloss, 1604 sq-ft/gal, 50 to 120 deg F, 0.1 lb/gal VOC

Ameron's Nu-Klad 114A is an epoxy filler compound used for steel, formed concrete or concrete block. It is a 100% solids compound, used to fill holes, voids and surface discontinuities up to one inch...

Antifouling Agent, High Solid, Liquid, Black , 3.33 lb/gal VOC

Ameron Amercoat 214 antifouling coating has a Low VOC, contains no organotion compounds and is for use over coated steel. It has a high coprous oxide content and is compatible with epoxy bottom...