Circular Saw Blade, All-Purpose, 10 in Dia, 40 -Teeth, 7600 rpm Max, 0.134 in Kerf, Carbide Cut Edge, Steel Blade

Amana’s Prestige saw blade is designed to produce excellent rips and crosscuts, in both solid wood and sheet goods, including melamine board. It features copper plugs to virtually eliminate vibration...

Circular Saw Blade, Cross-Cut, 10 in Dia, 5/8 in Arbor, 50 -Teeth, 7600 rpm Max, 0.135 in Kerf, Carbide Blade

Amana’s combination ripping/cross-cut blades are designed to work in natural woods. The teeth consist of four ATB, followed by one square raker. Large gullets in the saw body allow for deeper cuts...

Circular Saw Blade, Cut-Off, 0.126 in Kerf, Carbide Blade

Amana’s general-purpose cut-off and cross-cut saw blade also works well for trimming of natural woods.

Circular Saw Blade, Double Face Melamine, 10 in Dia, 5/8 in Arbor, ATB Teeth, 80 -Teeth, 0.126 in Kerf, Carbide Cut Edge, Steel Blade

Amana’s melamine blade is specifically designed to cut melamine chip-free on both sides, as long as the table saw fence is square to the blade and the arbor is running true. The blade features...

Circular Saw Blade, Fine Crosscut, Triple Chip, 10 in Dia, 5/8 in Arbor, 80 -Teeth, 7600 rpm Max, 0.126 in Kerf, Carbide Blade

Amana’s Triple-Chip fine crosscut saw blade can be used for trimming single or double-sided veneered and plastic laminated panels.

Circular Saw Blade, Fine Crosscut, 10 in Dia, 5/8 in Arbor, 80 -Teeth, 7600 rpm Max, 0.126 in Kerf, Carbide Blade

Amana’s Trim saw blade can be used to trim and size veneers and laminates in single sheets or stacks and can also be used on wood-veneered laminated panels.

Circular Saw Blade, General Purpose, Cut-Off, 5/8 in Arbor, 7600 rpm Max, 0.126 in Kerf, Carbide Blade

Amana’s General Purpose TCG cut-off saw blade is designed for general trimming and cross-cutting of natural woods, plywood, composition material and single or double-sided plastic laminated material.

Circular Saw Blade, Non-Ferrous, Triple Chip Grind, 10 in Dia, 5/8 in Arbor, TCG Teeth, 0.126 in Kerf

Amana’s non-ferrous saw blade features specially-designed carbide and geometry for cutting relatively thin-walled aluminum and non-ferrous extrusions and frames. A coolant or blade wax should always...

Circular Saw Blade, Non-Metallic, 5/8 in Arbor, M-TCG Teeth, 96 -Teeth, 1/8 in Kerf, Carbide Cut Edge

Amana’s Non-Melt saw blade is specially designed for acrylic sheets, Plexiglas, Lexan, etc. Its negative hook angle reduces the tendency of chip welding or melting of material.