Compressed Sheet, 60 in Lg, 60 in Wd, 1/4 in Thk

Sepco’s Style 200 compressed sheet is made from non-asbestos fibers, bonded together into a homogenuous sheet with an SBR binder. It withstands temperatures up to 750 deg F (400 deg C), with...

Gasket Sheet, 25 ft Lg, Graphite, 1/2 to 1 in

Sepco’s Grafoil gaskets provide leak-free performance at moderate bolt loads, with no cold flow or creep. They eliminate precision bolt tightening and flange sticking. In fact, the prime requirement...

Gasket Sheet, 25 ft Lg, Graphite, 1/4 to 1/2 in

Sepco’s Grafoil gaskets provide leak-free performance at moderate bolt loads, with no cold flow or creep. They eliminate precision bolt tightening and flange sticking. In fact, the prime requirement...

Gasket Sheet, 36 in Lg, 121 deg C, 500 psi, Fiber, Smooth, Tan

Sepco’s Style 440 sheets are made of a strong plant fiber that has been impregnated with a glycerine compound, and left smooth with no surface treatment. The resulting product is tough and resilient,...

Gasket Sheet, 4 ft Lg, 1/8 in Thk, Graphite

Sepco’s Grafoil gaskets provide leak-free performance at moderate bolt loads, with no cold flow or creep. They eliminate precision bolt tightening and flange sticking. In fact, the prime requirement...

Handhole Gasket, 2-1/2 in Id, 3-1/2 in od, 1/4 in Thk, 3/4 in Wd, 450 deg F, Wire-Inserted Commercial Grade Cloth

Sepco’s gaskets are made of wire-inserted commercial grade cloth, then treated with a high heat-resisting rubber compound, folded, then formed to the required size and shape. They are recommended for...

Handhole Gasket, 3 in Id, 4 in od, 1/4 in Thk, 5/8 in Wd, 450 deg F, Wire-Inserted Commercial Grade Cloth

Sepco’s gaskets are made of wire-inserted commercial grade cloth, then treated with a high heat-resisting rubber compound, folded, then formed to the required size and shape. They are recommended for...

Impregnated Packing, 1850 fpm Shaft, 260 deg C

The SEPCO® ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in...

Joint Sealant, -450 to 600 deg F, 200 Bar, PTFE

This original form-in-place gasketing material can be used practically everywhere. It is easy to install, even on vertical surfaces and is ideal for large, complex or damaged flanges. Since there is...