Primer, Heavy Duty, 5 gal Container, Gray , Flat, 9.7 m2, -18 to 50 deg C

Dimetcote 9 is a self-curing, solvent based inorganic zinc coating used as a heavy duty primer with recommended topcoats or as a single coat protective coating in recommended services. To obtain the maximum performance for which Dimetcote 9 is...

AMERCOAT #185HS Primer, Universal, 5 gal Container, Can, Red Oxide , Flat, 946 sq-ft/gal at 1 mil, 2 to 49 deg C, 3.2 lb/gal VOC

Amercoat's #185HS is a universal primer that contains high solids and is VOC-compliant. Its versatile formula can be applied over a wide range of substrates and accepts a wide range of topcoats. Amercoat 185HS protects structural steel and tank exteriors...

AMERCOAT #65HS Epoxy Primer, Zinc Rich, Reddish Grey Color

Amercoat's #68HS is a zinc-rich epoxy primer that offers outstanding resistance to chemicals and severe weathering. It has excellent adhesion to inorganic zincs and is easily applied by airless or conventional spray. It is ideal for bare steel on new...

AMERCOAT Alkyd Shop Primer, Quick Dry, 5 gal Container, Gray , 2.8 lb/gal VOC

Amercoat is an economical ready-to-spray, fast air dry, alkyd shop coat designed for priming properly prepared bare steel. It is ideally suited for use in fabrication shops or on structural steel. It dries for handling or topcoating in twelve hours under...

Primer, Pigmented, 5 gal Container, White Color

Gemini’s Hi-Speed Dispersion white pigmented sealer is formulated specifically as a prime coat for new raw wood and is designed to fill, sand well, then be topcoated with other coatings. It is AIM-compliant and meets or exceeds 680 VOC regulations. It...

DIMETCOAT 9, Inorganic Zinc Primer, Heavy Duty, 5 gal Container, Gray , Flat, 397 sq-ft/gal, -18 to 50 deg C

Dimetcote 9 is a self-curing, solvent based inorganic zinc coating used as a heavy duty primer with recommended topcoats or as a single coat protective coating in recommended services. To obtain the maximum performance for which Dimetcote 9 is...

Primer, Multi-Purpose, 16 oz Container, Aerosol Spray Can, Gray , Flat, 68 sq-ft, 24 hr Curing, 50 to 95 deg F, 0.6 VOC, Ketone

Zynolyte Multipurpose Primers are a non-lifting, high-quality primer coating for use on surfaces where good adhesion is needed before top/finish coat. This quick-dry primer will prepare and seal both porous and nonporous surfaces, enhancing the quality...

Carbozinc 11 Primer, Corrosion Resistant, 5 gal Container, Gray, Green , Flat, 1000 sq-ft/gal, 333 sq-ft/gal, Inorganic Zinc Silicate, 45 min Curing, 7 oz/gal VOC

Time-tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection...

Primer, Fast Drying, 1 gal Container, Black, Grey, Ignition Yellow, Light Grey, Safety Red, Safety Yellow, White , High Gloss, 9 hr Curing, 50 deg C

Carbothane 8845 is a fast dry, high solids, low VOC, high gloss, high build, two componentpolyurethane coating. Carbothane 8845 exhibits the excellent dry times and handlingcharacteristics required by Original Equipment Manufacturers. This coating has...