DODGE Chain Breaker, Pin Extractor, Suitable For 100 to 160 Numbers Chain

This fast working tool is practical for removing chain pins when roller chain needs to be disconnected or when various lengths of chain need to be made up. Three sizes of pin extractors are available to use on riveted and cottered chain, sizes 25 thru...

DODGE Chain Breaker, Pin Extractor, Suitable For 60 to 80 Numbers Chain

This fast working tool is practical for removing chain pins when roller chain needs to be disconnected or when various lengths of chain need to be made up. Three sizes of pin extractors are available to use on riveted and cottered chain, sizes 25 thru...

DODGE Chain Breaker, Pin Extractor, Suitable For 25 to 50 Numbers Chain

This fast working tool is practical for removing chain pins when roller chain needs to be disconnected or when various lengths of chain need to be made up. Three sizes of pin extractors are available to use on riveted and cottered chain, sizes 25 thru...

Offset Link, Double Strand Riveted Roller Chain, 100-2 Chain

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire and tube drawing machines, printing presses,...

Roller Chain Sprocket, Type B1, Single Strand, 19.82 in od, #100 Chain, 48 -Teeth, 19.112 in Dia Pitch, 6-1/4 in Dia Hub, 1/2 in-13 UNC Screw, Steel, QD Bushing

QD® (Quick Detachable) is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.

Roller Chain Sprocket, Type BS, Single Strand, 4.32 in od, #50 Chain, 20 -Teeth, 3.995 in Dia Pitch, 3 in Dia Hub, 1/4-20 x 1/4 in Screw, 1 in Lg Thru Bore

These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.

Roller Chain Sprocket, Type B, Single Strand, 0.919 in od, #25 Chain, 10 -Teeth, 0.809 in Dia Pitch, 1/2 in Dia Hub, 1/2 in Lg Thru Bore, Steel, 1/4 in Pitch

B style sprockets are flat sprockets with a hub extension on one side. These plain bore sprockets can easily be bored to a metric or standard size to fit your application. Keyways, set screws and hardened teeth are quick alterations that can be made.

Connecting Link, 40-240 Chain, 1 in Pitch, 5/8 in Wd, 0.312 in Dia Pin, 0.95 in Ht Link Plate, 1/8 in Thk Link Plate, Carbon Steel

Armor coat chain features the strength of carbon steel with a corrosion resistance exceeding nickel plated chain, The baked on coating is applied both prior to assembly and again after assembly.

DODGE TLB518H Roller Chain Sprocket (use 1610 Bushing), Type BTL, Single Strand, 3.919 in od, #50 Chain, 18 -Teeth, 3.6 in Dia Pitch, 2.84 in Dia Hub, 1 in Lg Thru Bore, Low Carbon Steel

Roller chain drives have the ability to handle high shock loads and deliver dependable performance make them the drive of choice for many applications. Dodge® Taper-Lock® sprockets require no expensive or time-consuming re-matching. Their taper-bushing...