Pipe Cross, Two Socket, Cross, Malleable Iron, Galvanized

Usually paired with Type 25 to give a 90 deg joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

Rail Support, Malleable Iron, Galvanized

This fitting, with holes provided for countersunk flat head screw fixings only, is designed to carry handrails along walls or to fix structures back to walls. The tube passes through the fitting but does not allow for two tubes to be joined within the...

Elbow, Side Outlet, 90 deg Elbow, Malleable Iron, Galvanized

A 90 deg corner joint most frequently used for the top rail of safety railing. It can also be considered for the corner joint of benches, work tables and other rectangular structures.

Elbow, -20 to 350 deg F, 90 deg Elbow, FNPT End, Class 150, 150 lb, Hot Dipped Galvanized, Black

Quality fittings are made with care and attention to detail. With better molds we can reduce parting lines and rough edges resulting in better fluid flow. By using a low temperature galvanizing process the coating is more durable which means a longer...

Tee, Side Outlet, Tee, Galvanized, Malleable Iron

Most frequently paired with Type 20 to give a 90 deg corner joint for the middle rail of safety railing and other rectangular structures. The upright passes through the fitting.

Elbow, 45 deg Elbow, NPS End, Class 150, 150 psi, Hot Dipped Galvanized, Malleable Iron, Black Oxide, Black

LDR's galvanized 45- and 90-deg street elbows are compliant with ASTM A197, ASME B 16.3, B16.14, B16.39, B1.20.1 and A-153 for material, dimensions and threading. They are lead free, containing no more than the 0.25% maximum lead content allowed by...

Bushing, Hex Head, Bushing, NPS End, Class 150, 150 lb, Hot Dipped Galvanized, Malleable Iron, Black

LDR's galvanized bushings are compliant with ASTM A197, ASME B 16.3, B16.14, B16.39, B1.20.1 and A-153 for material, dimensions and threading. They are lead free, containing no more than the 0.25% maximum lead content allowed by federal law for any item...

Tee, -20 to 350 deg F, Tee, FNPT End, Class 150, 150 lb, Hot Dipped Galvanized, Malleable Iron, 1/8 to 3 in

Quality fittings are made with care and attention to detail. With better molds we can reduce parting lines and rough edges resulting in better fluid flow. By using a low temperature galvanizing process the coating is more durable which means a longer...

Elbow, -20 to 350 deg F, 45 deg Elbow, FNPT End, Class 150, 150 lb, Hot Dipped Galvanized, Black

Quality fittings are made with care and attention to detail. With better molds we can reduce parting lines and rough edges resulting in better fluid flow. By using a low temperature galvanizing process the coating is more durable which means a longer...