Knockout Punch, Electricians, Steel

Greenlee's conduit punches are part of a complete unit that includes a punch, die and draw stud. When properly assembled, they make clean, fast and accurate pilot holes. They can be used on mild steel up to 14 ga, in battery-powered, hydraulic, ratchet...

Cable, Aircraft, 7 x 19 Strand, Stainless Steel Insulation, Stainless Steel Jacket

Aircraft Cable is constructed from strands, cords and wire rope made of special-strength wire. It is designed primarily for use in aircraft industry and military applications, but is used widely for commercial applications as well. Aircraft Cable is...

Cant Hook, Duckbill, Straight, 2-1/4 in Dia Handle, Hickory Handle, 6 to 16 in Log, 7/16 x 7/8 x 8 in Tip

Dixie cant hooks are used to move, roll, slide or float logs or poles into position. With the blunt end up against a log or pole, the hook grabs it at a second location. Once engaged, the handle gives the operator leverage to reposition it. These tools...

Pike Pole, 1-1/2 in Dia Handle, Anodized Aluminum Handle, Straight Hook Tip, 10 ft to 12 ft

Dixie Pike Poles are manufactured to withstand extensive use of handling timber in and around water. All pike hooks are manufactured from a single piece of high carbon steel and drop forged.

Anchor Shackle, Type D, Screw Pin, Carbon Steel Body, Alloy Steel Pin, Galvanized

Crosby’s screw-pin forged shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at –20 deg C. The working load limit is permanently shown on every shackle. Each shackle features a Red Pin made of alloy (the mark of genuine...

Cable Tie, Heavy Duty, 1/4 in Wd, 0.072 in Thk, Double Lock, 120 lb Tensile, 32 to 185 deg F, Nylon

These self-locking cable ties are 14 in long, with positive-locking teeth for secure bundling. These ties have up to 50% more tensile strength and 15% larger bundle diameters than competitive products, are UL-listed and meet UL94V-2 flammability...

Inverter Drive, 5 hp

This model from AC Tech's MC series of microdrives is ideal for standard, variable frequency applications. It was designed for typical constant torque applications where motor speed is controlled from the drive keypad, a control signal or a standard...