Concrete Saver Moderate Duty Floor Coating (PAINT CLEAR EPOXY FL COAT 6010)

PAINT CLEAR EPOXY FL COAT 6010|Rustoleum’s Concrete Saver moderate-duty floor coating is a two-component water-based epoxy coating for concrete floors. It combines the performance of solvent-based epoxies with the convenience of water-based coatings. It...

High Heat Aluminum Coating (RUSTOLEUM 1S H64 BBQ BLACK)

RUSTOLEUM 1S H64 BBQ BLACK|HI-HEAT|Rustoleum’s High Heat Aluminum is a unique coating that uses a pure silicone resin to provide protection to surfaces subject to temperatures between 500° and 1200°F. It can be used both interior and exterior as a...

High Heat Aluminum Coating (PAINT ALUMINUM GAL 4315)

PAINT ALUMINUM GAL 4315|Rustoleum’s High Heat Aluminum is a unique coating that uses a pure silicone resin to provide protection to surfaces subject to temperatures between 500° and 1200°F. It can be used both interior and exterior as a two-coat system...

High Heat Aluminum Coating (PAINT ALUMINUM 2-GAL-CAN 4215)

PAINT ALUMINUM 2-GAL-CAN 4215|Rustoleum’s High Heat Aluminum is a unique coating that uses a pure silicone resin to provide protection to surfaces subject to temperatures between 500° and 1200°F. It can be used both interior and exterior as a two-coat...

Pro Thinners (PRO 60305 1S PAINT THINNER)

PRO 60305 1S PAINT THINNER|Paint Thinner effectively thins oil-based paint, stain and varnish. It can also be used to clean brushes and equipment immediately after use. Makes application easier and improves the appearance of your paint job.Unit of...

Sealkrete Waterproofing Sealer (SEAL KRETE 10005 5S WATERPROOF)

SEAL KRETE 10005 5S WATERPROOF|Sealkrete's Original Waterproofing Sealer is a water-based, very low VOC, strong binding, clear acrylic, penetrating sealer/primer.  It penetrates deeply into the pores of concrete, binding to the sand and cement...

Sealkrete Waterproofing Sealer (SEAL KRETE 10001 1S WATERPROOF)

SEAL KRETE 10001 1S WATERPROOF|Sealkrete's Original Waterproofing Sealer is a water-based, very low VOC, strong binding, clear acrylic, penetrating sealer/primer.  It penetrates deeply into the pores of concrete, binding to the sand and cement...

Amercoat Thinner, #65 1 Gal (AMERCOAT THINNER AT765/01 ADDITIONAL HAZMAT FEE TO SHIP)

AMERCOAT THINNER AT765/01 ADDITIONAL HAZMAT FEE TO SHIP|Amercoat's #65 thinner has a flashpoint of 78°F (26°C). Although most Amercoat paint and coating products don't need a thinner, it is sometimes necessary, such as during colder temperatures or with...

Amercoat 385, Multi-Purpose Epoxy (AMERCOAT EPOXY PRIMER)

AMERCOAT EPOXY PRIMER|AT385-3/01 PART A|Amercoat's #385 is a multi-purpose high-build epoxy coating that forms a tough, abrasion-resistant, durable film. It adheres strongly to bare steel, coated steel and inorganic zinc silicate on new construction,...